Flextanks and accessories

Product Details 2” Dexter Cap with gasket and ¼” NPT. Fits all Dexter Tank Lids when using a fermentation lock.

(2" Drum Bung w/ 3/4" NPT Opening)

Product Details A combination of the valve flange and butterfly valve kits. Includes all parts required to attach a drain valve to any of ...

Product Details A combination of the valve flange and butterfly valve kits. Includes all parts required to attach a drain valve to any of ...

Product Details Drain valves are always positioned in the same place on a given tank and molded-in threaded inserts provide secure attach...

Product Details Drain valves are always positioned in the same place on a given tank and molded-in threaded inserts provide secure attachm...

Product Details Manage your ferment temperature with our new Italian Engineered Fahrenheit thermometer; threads into any Flextank at the 1...

Product Details 18mm Hex Drive Thermowell, screws into sample valve port. In 304 SS comes complete with EPDM gasket and set screw

Product Details SV1T rework kit, includes new Teflon Seat and O-ring. (SV1T Valve shown sold separately)

Product Details **Skins come sealed and ready to use as is; do not open with knife. Skins are ready to use do not open unit, use good practic...

Product Details **Skins come sealed and ready to use as is; do not open with knife. Skins are ready to use do not open unit, use good practic...

Product Details **Skins come sealed and ready to use as is; do not open with knife. Skins are ready to use do not open unit, use good practice o...

Product Details A Flextank exclusive, this US designed and manufactured valve is loosely modeled after light aircraft fuel test valves. A spring...

Racking Port Kit-2" SS Round Flange 6-Bolt Fitting,1- 2" 6-Hole Gasket, 3-2" Tri-Clamps, 3- 2" Tri-Clamp EPDM Gaskets, 1-RE Gasket 2" Teflon, 1-2” ...

Product Details Racking Port Kit- 2" Stainless Steel Bulkhead Fitting, 2" BH Gasket, Nut, 1- 2" Tri-Clamp, 1- 2" Tri-Clamp Teflon Gasket, 1-1.5" ...

Product Details Racking Port Kit-1.5" SS Round Flange 6-Bolt Fitting,1- 1.5" 6-Hole Gasket, 3-1.5" Tri-Clamps, 3- 1.5" Tri-Clamp EPDM Gaskets, 1-...

Product Details 3- 1.5" Tri-Clamps, 3- 1.5" Tri-Clamp EPDM Gaskets, 1.5" Tri-Clamp Blank, and 1.5" Butterfly Valve, Racking Elbow 1". This kit ca...

Product Details The racking (rotating) elbow fits through a 1.5” or 2.0” tank flange. You must install the racking elbow before you fill the tank. ...

Product Details The two-way entry reinforced pallet is designed to support a load of up to 3300 lb. a standard warehouse storage setting. The conto...

Product Details PRODUCT CURRENTLY ON BACKORDER. HD 48x48 with 5 rods - Use for storage for EM30, EH30, DM50,DH50,EM70, EH70,DM80,DH80 Weight: 50 pd...

Product Details Pair of Lifting Brackets for Apollo Tank (includes 12 bolts and washers with a hex wrench for assembly)

The fermentation lock is a one way pressure release valve that opens at approximately 0.1 PSI pressure. It screws into the 2 in. threaded fitting i...

Product Details Eco Blow Off Tube Kit – Contains 2’’ NPT Bung, adaptor, 90 Degree Elbow and 6’ of Vinyl Tubing. Easy to contain an over activ...

Product Details Dexter Lid for tanks with New Generation Lid (Current Style)-Includes New Dexter Lid with 2 caps (for use on tanks purchased...

Product Details Lid Assembly for tanks with New Generation Lid (Current Style)-Includes New Dexter Lid, Gasket, and Clampo Clamp (for use on t...

Product Details Lid Assembly for tank with previous style lid-Includes Older Dexter Lid, Gasket, and Clampo Clamp (tanks purchased prior to ...

Product Details The valve assembly includes the valve, a tri-clamp gasket and clamp to attach the valve to a tank fitting. Package pricing is av...

Product Details The valve assembly includes the valve, a tri-clamp gasket and clamp to attach the valve to a tank fitting. Package pricing is a...

Product Details Flextank butterfly valves are manufactured in Taiwan to the highest standards. Each valve is individually tested before shipmen...

Product Details Flextank butterfly valves are manufactured in Taiwan to the highest standards. Each valve is individually tested before shipme...

Product Details Flextank designed bulkhead fittings allow a Tri-Clover butterfly valve to be positioned anywhere on our tanks. These fittings ar...

Product Details   Flextank designed bulkhead fittings allow a Tri-Clover butterfly valve to be positioned anywhere on our tanks. These fittings a...

Product Details Flextank designed bulkhead fitting allows a Tri-Clover butterfly valve to be positioned anywhere on our tanks. These fittings ar...

Product Details Flextank designed bulkhead fitting allows a Tri-Clover butterfly valve to be positioned anywhere on our tanks. These fittings ...

Product Details Apollo Lift Strap Only May be purchased as a kit in Cat. No. ALS1

The ALS1 is a simple but elegant solution for lifting Flextank’s “Apollo” fermentor and tipping pomace into a bin or press basket. It consists of...

Product Details This accessory kit includes a complete SS bulkhead fitting valve installation and a Tassilini sample valve. It combines the BH4,...

Product Details This accessory kit includes a complete SS bulkhead fitting valve installation and a Tassilini sample valve. It combines the BH4,...

Product Details This accessory kit includes a complete SS bulkhead fitting valve installation and a Tassilini sample valve. It combines the BH3,...

Product Details This accessory kit includes a complete SS bulkhead fitting valve installation and a micro sample valve. It combines the BH3, BV3...

Product Details This accessory kit includes a complete drain valve installation and micro sample valve. It combines the VF1, BV3, and SV3 units....